| Position / Job Code | No. of Vacant Positions | Qualifications & Experience |
| EQUIPMENT OPERATOR / JD-05 (OEM-MES) | 2 |
Min 9 years education & 10 years experience in operating equipment including Mobile Cranes ranging from 30 to 250 metric tonne with Mobile Crane Operator License, Knuckle Boom Crane License, Fork Lift Truck Operators License, Heavy Vehicle Trailer License and Light Vehicle License
|
| GENERAL OPERATOR /JD-07 (TDM-MES/RAL/RAA) | 1 | 12 years Secondary Education with 2/3 years formal technical training in Process Plant Operation to OND/ONC or equivalent plus relevant training in Safety & Computer based systems. Minimum 5 years exp in Gas Processing &Distribution system including previous experience of operating DCS/SCADA Control System |
| DRIVERS (HEAVY VEHICLE) / JD-04 (OEM-MES) | 3 |
Completion of Intermediate education (9 years). 10 years experience in operation of heavy-duty vehicles and heavy
equipment.Skills in oil field safety awareness. Knowledge of Qatar Traffic regulations. Driving License requirement – Light Vehicle, Heavy Vehicle,Trailers, Forklift Trucksand Knuckle Boom Truck Crane
|
| GENERAL TECHNICIAN -MECH / JD-10 (GPM-MES/GNM-MES) | 2 |
12 years Secondary education, followed by 2 years formal course in mechanical crafts. 5 years mechanical crafts and maintenance experience in an Oil or Gas processing plant
|
| TECHNICIAN I (MECHANICAL / VALVE) / JD-16 (OEM-MES) | 2 |
Completion of Secondary (12 years) education followed by two years full time mechanical trade training. At least 5 years experience within oil and Gas / Petrochemical industries with respect to various valves activities.Overhauling and attending troubleshooting of different types of PRV, RV, Ball Valve, Gate Valve, Butterfly Valves and Compressor Valves
|
|
TECHNICAL ASSISTANT / JD-14 (TOM -MES)
|
1 |
Diploma in Science / Commerce or equivalent. Minimum 5 years exp in Technical and Projects environment.Conversant with computerised Oil & Gas operations document Control System
|
|
TECHNICIAN I – ELECT / JD-19 (GPM-MES/ GNM-MES)
|
3 | Minimum 5 years exp in electrical maintenance and repair work within a hydrocarbon/oil refinery or gas processing plant. Short courses in safety & hazardous area. 2 years full time training in electrical trades to OND level or equivalent. |
|
TECHNICIAN I – ELECT /JD-22 (TOM-MES)
|
1 |
12 years Secondary education or equivalent with relevant trade certificate/diploma. Min 5 years of relevant exp in oil and gas/petrochemical industry.Under SLD, knowledge of PLC , VSD, UPS etc
|
| TECHNICIAN I – MECH / JD-21 (GNM-MES/ GPM-MES) | 3 | 12 Years Secondary education with three years course in mechanical crafts (OND or equivalent). Min 6 years of exp in mechanical crafts & maintenence experience. Min 4 years in Oil & Gas processing plant. |
|
PANEL OPERATOR /JD-26 (TOM-MES)
|
1 |
12 Years Secondary Education with technical training in a process plant operation to OND/ONC levels plus relevant training in safety and computer based system. Min 7 years exp in gas processing and distribution in oil and industry or
refinery/petrochemical industry including 3 years of previous exp of operating DCS/SCADA Control System.
|
|
TECHNICIAN I (MECHANICAL) / JD-17 (OEM-MES)
|
4 | Completion of Secondary (12 years) education followed by two years full time mechanical trade training. At least 5 years experience within oil and Gas / Petrochemical industries in mechanical and machine workshops activities. Rapairs and Overhauls of all types of pupms, gearbox, heat exchangers. |
| GENERAL TECHNICIAN – ELECT / JD-07 (MES/MCR/MCE) | 3 | 12 years secondary education with Diploma certificate in electrical discipline. Min 10 years exp electrical in major Oil & gas Industries |
| TECHNICIAN I (MECHANICAL / WELDER) / JD-15 (OEM-MES) | 2 | Completion of Secondary (12 years) education followed by two years full time mechanical trade training. At least 5 years experience within oil and Gas / Petrochemical industries in mechanical and machine workshops activities. Should have valid Coded Welders Certificate. |
| DRAFTSMAN (ELECT/INST) / JD-02 (OEM-MES) | 1 |
At least 02 years College Level with same Engineering Discipline Or completion of Secondary (12 years) educations followed by at least 02 years full time training in Draftsmanship or in an engineering discipline (equivalent to OND/ONC). Advanced AutoCAD knowledge is required, with knowledge of 3D.Carry out Instrumentation / Electrical design detailing. At least 6 years & above of Electrical/instrument practical experience within Oil and Gas Facility (Onshore/Offshore)
|
|
LAB ASSISTANT / JD-16 (MES/BSR/BSL)
|
3 |
12 years Secondary education with 2 years exp in hydrocarbon sample collection / handling techniques in a Petroleum
Refinery Laboratory.
|
|
DRAFTSMAN (MECH/PIPING) / JD-03 (OEM-MES)
|
1 |
At least 02 years College Level with same Engineering Discipline Or completion of Secondary (12 years) educations followed by at least two years full time training in Draftsmanship or in an engineering discipline (equivalent to OND/ONC). Advanced AutoCAD knowledge is required, with knowledge of 3D. Develop Plot Plan, PFD, P&ID, Piping Plan, Isometrics, boM etc. At least 6 years & above of Mechanical practical experience within Oil and Gas Facility (Onshore/Offshore)
|
| TECHNICIAN I – INST / JD-27 (MES/MCR/MCE) | 1 | Diploma in Instrumentation/Control Systems Engineering. Min 6 years experience as Instrument technician in Refinery, Oil & Gas or petrochemical industry.Knowledge of DCS , PLC and hazard area classification |
| FOREMAN RIGGER / JD-06 (OEM-MES) | 3 | 7 years related experience in Oil and Gas Industry in the similar field. High School plus 2 years Trade Training. |
| TECHNICIAN I – MECH-STATIONARY / JD-29 (MES/MCR/MCM) | 1 | Diploma/Certificate in Mechanical Technology with 2 years training. Min 5 years of experience in Refinery/Oil & Gas or Petrochemical industry. |
|
FIELD OPERATOR I / JD-01 (BPO-OFF)
|
1 | 12 years Secondary education with Min 3 years Experience in offshore to monitor all instruments during start up & shutdown sequence. |
| TECHNICIAN I (INSTRUMENT) / JD-18 (TDM-MES) | 1 | Completion of secondary school (12 years) education, followed by 2 years of formal full time training in instrumentation, electronics or similar to ordinary national diploma level or equivalent plus relevant short courses in safety. 4 years experience in the installation, maintenance and overhaul of pneumatic, electrical and electronic instrumentation systems of various types and serving diverse purposes. |
|
GENERAL TECHNICIAN (NDT) / JD-14 (MES/AIR/AII)
|
1 |
Completion of 12 years of education plus 2 years diploma course in Metallurgical/ Mechanical Engineering. 5 years’ experience in NDT inspection preferably in Refinery, Gas/Oil industries. Out of which 3 years’ experience should be post NDT certification.Certification in BINDT-PCN/TWI-CSWIP/ASNT ACCP/ASNT CP – 106/EN-ISO 9712 or equivalent. Level II in UT,PT,MT ,RT & RTFI
|
| GENERAL TECHNICIAN (COATING) / JD-05 (MES/AIR-AII) | 1 | GENERAL TECHNICIAN (COATING) / JD-05 (MES/AIR-AII) |
|
WORKBOAT INSPECTOR / JD-20 (OEO-OFF)
|
2 | Minimum of 8 Years experience in the Inspection of Static Plant, Structures Pipework and Pipelines during construction and installation, Pressure retaining Equipment inspections both on stream and during shutdowns. BSc in Mechanical Engineering, C.S.W.I.P 3.2 Senior Welding Inspector, API 570 Piping Inspector, API 510 Pressure Vessel Inspector, Possession of Coating Inspection Qualification |
| GENERAL TECHNICIAN (LAND SURVEYING) / JD-01 (CL-RAL) | 2 | Secondary education (12 years) and completed a 3 years Diploma in Land Surveying, but shall have at least three years full time topographical land survey experience in a well established engineering company preferable in the oil and gas sector. Must have extensive experience in operating Total Station and or GPS equipment and AutoCAD. Must have a valid driving license. |
|
GENERAL TECHNICIAN – ELECT / JD-08 (GPM-MES/GNM-MES)
|
1 |
12 Years Secondary education with two years formal training in electrical high voltage, medium voltage, low voltage switchgear, control protection relays or similar to ordinary national diploma level. 5 years minimum experience in the installation, maintenance, r epair and overhaul of a wide variety of low, medium and high voltage rotating, control and protection equipment
|
| OPERATOR I / JD-13 (TDM-MES/RAA/RAL) | 2 | 12 Years Secondary education with 1 year full time technical training in process plant operations to City and Guilds Institu te First Certificate level plus relevant short courses in safety, plant operations. Min 4 years of experience in operating process plant in the oil or petrochemical industry. |
| TECHNICIAN I – INST / JD-20 (GNM-MES/ GPM-MES) | 5 |
12 Years Secondary education with 2 years of training in instrumentation, electronics or similar to diploma level or equival ent plus relevant short courses in safety. Min 5 years experience in the installation, maintenance and overhaul of pneumatic, electrical and electronic instrumentation sy stems of various types.
|
| GENERAL TECHNICIAN (INSPECTION) / JD-09 (MES/AIR-AII) | 1 |
Completion of 12 years of education plus 2 years diploma course in Metallurgical/ Mechanical Engineering. 5 years’ experience in NDT inspection preferably in Refinery, Gas/Oil industries. Out of which 3 years’ experience should be post NDT certification.Certif ication in BINDT- PCN/TWI-CSWIP/ASNT ACCP/ASNT CP – 106/EN-ISO 9712 or equivalent. Level II in UT,PT,MT ,RT & RTFI
|
| SR. TECHNICIAN (C/M) / JD-23 (MES/AIR/AIO) | 1 | Certified 3 years Diploma holder. Mechanical trade training minimum 4 years. Minimum of 4 years hands on experience of the use of portable and fixed vibration equipment.Experience of analysis of spectrum, time wave, Polar and Orbit plots. |
| FOREMAN (RIGGER) / JD-04 (MES/MCR-MCM) | 1 | Minimum 12 years of School education, formal professional level courses and certifications in heavy lifting/rigging using mobile and overhead cranes, winches, etc. along with 8 – 10 years of working experience in construction and/or petrochemical environment |
| PLANNING TECHNICIAN / JD-20 (MES/MCR/MCP) | 3 |
Completion of Secondary (12 years) education, followed by formal training in the use of Computerized Maintenance Management Sys tem and planning software. 7 years of maintenance experience in Petroleum Refinery, Oil & Gas or Petrochemical Industry.Must have releva ntexperience in Planning & Scheduling software. (Primavera and Microsoft Project)
|
| TECHNICIAN (ELECTRICAL) / JD-26 (MES/MCR/MCE) | 1 | Completion of Industrial secondary (12 years) with Diploma education certificate in electrical discipline. Minimum 8 years electrical hands on experience in major Oil & gas Industries. |
| TECHNICIAN I (MECH) / JD-24 (TOM-MES) | 1 |
12 Years Secondary education with 2 years formal course in mechanical crafts equivalent to City & Guilds. Minimum of 5-6 years hands on experience related to mechanical maintenance and repair of equipment & machineries used within the Oil/Gas/Petrochemical industry.
|
| GENERAL TECHNICIAN – MECH / JD-11 (MES/MCR/MCM) | 3 | Diploma/Certificate in Mechanical Technology from a recognized institution. Mini 8 years of exp in Refinery/Oil& Gas/Petrochemical plants. Must have experience in Pumps (Single & Multistage), Steam/Gas Turbines, centrifugal & Reciprocating Compressors, Turbo machinery etc. |
| TECHNICIAN II (AUTO ELECTRICIAN) / JD-30 (MES/MCR/MCM) | 1 | Qualified with a Diploma/Certificate in Auto Electrician from a recognized institution. Extensive knowledge in electrical repair of heavy equipment such as cranes, forklifts, automobiles, etc. A minimum of 5 years experience in Auto electric field. |
| GENERAL TECHNICIAN (DIESEL) / JD-06 (MES/MCR-MCM) | 1 | A minimum of 10 years experience in maintenance of diesel engines/generators & heavy vehicles like cranes, shovel loaders, fork lifts, etc. Qualified with a Technology Diploma/certificate in Automobile / Mechanical Technology from a recognized institution. |
| FIELD OPERATOR I / JD-06 (NPO-OFF) | 1 | 12 Years Secondary Education with 2 years technical training . Min 4 years experience in production and process operations preferably in an offshore location. |
| GENERAL TECHNICIAN – INSTRUMENT / JD-13 (NPO-OFF) | 1 | Min. 5 years offshore Experience, OND in relevant engineering discipline & 5 years experience in the field |
|
GENERAL TECHNICIAN (MECH) / JD-12 (MES/MCR-MCM)
|
1 | Minimum 12 years of school education, formal professional courses in heavy lifting equipment maintenance and operation along with 8 -10 years of working experiences in construction and/or petrochemical environment. |
|
SR. TECHNICIAN (INST) / JD-25 (MES/MCR/MCE)
|
1 | Diploma in Instrumentation/Control Systems Engineering from a well recognized College/University. A minimum 10 years experience as Instrument technician in Refinery, Oil & Gas or petrochemical industry. |
|
OPERATOR I / JD-17 (MES/PDR/PDO)
|
3 | Diploma or Higher Secondary Certificate (12 Years) with relevant experience. 7 Years of operations experience in a Oil Movement/ Blending Unit / Pipe line Operation / Jetty operation |
|
OPERATOR I / JD-18 (MES/PDR/PDO)
|
6 | Diploma in chemical, Higher Secondary (12 Years) with experience or Equivalent. Minimum 7 Years of field operations experience in the Boilers operation, N2 plant and other utilities e.g. instrument air, water production and cooling water. |
|
OPERATOR I / JD-19 (MES/PDR/PDO)
|
1 | Diploma in chemical, Higher Secondary with experience or Equivalent. Minimum 7 Years of field operations experience in the Sulfur Recovery Unit, Sulfur storage and handling, Amine Treatment Unit, Sour Gas treatment, spent caustic treatment, Sour Water Treatment unit |
|
FIELD OPERATOR I / JD-03 (HTO-OFF)
|
3 | 12 years Secondary education with 2 year process training. Min 4 years exp as Field Operator Experience in crude oil storage tanks housekeeping & supporting facilities of the terminal. |
|
FIELD OPERATOR I – (WHJ) / JD-02 (BPO-OFF)
|
2 | 3 years offshore experience. Secondary education plus 2 years technical training. Trained in TBOSIET, H2S, HLO |
|
GENERAL TECHNICIAN MECHANICAL / JD-11 (NPO-OFF)
|
1 | Minimum 5 years exp. OND in relevant engineering discipline. Experience in inspection of malfunctioning machinery & predictive maintenance checks is must. |
|
GENERAL TECHNICIAN (ELECTRICAL) / JD-12 (NPO-OFF)
|
1 | 5 years offshore experience. OND in relevant engineering discipline & 5 years experience in the field |
|
SENIOR TECHNICIAN (C/M) / JD-16 (OEO-DOH)
|
1 | Minimum 8 years experience (i/c offshore) as a Senior Mechanical Technician (Rotating) or Reliability Technician. Good knowledge of RotatingEquipment’s operations. Minimum High National Diploma or its equivalent followed by specification engineering courses. Certified to BINDT Level- 2 on vibration and Level-1 in Thermograph |
|
DRAFTSMAN / JD-02 (CL-RAL)
|
4 |
Secondary education (12 years) followed by at least two (2) years full time training in drafting in various engineering disciplines, but must have at least five (5) years design and drafting experience preferably in the Oil and Gas environment. Must have extensive working e xperience in the AutoCAD. Working experience in ESRI GIS is also preferred. Must have a valid driving license.
|
The selected candidates will be on Payroll of the DANEM. However, they would be working under the direct supervision of client
at client’s premises for the contract duration of 5 years.
The working days/hours would be as per the client contract guidelines. Candidates with Transferable Visa and NoC are preferre
d. Please mention the Position and Job Code in your application.
Interested candidates may send their resume at recruitmentsdewq@gmail.com
and recruitmentsdewq@yahoo.com
latest by 13th July 2017.
for used cars, jobs, villas and rooms for rent, flats, used furniture, and property for sale in the Qatar. SUBMIT AD
